The BG Screwless Flat plate range has low profile clip on covers which sit flush against the wall ideal for modern interiors. The integrated moisture control gasket protects the metal from plaster and moisture, whilst the faceplates are simple to remove when decorating for a practical and convenient solution.

Brand Name	British General
Colour	Matt Black
Manufacturer Model No	Screwless Flatplate
Guarantee	25 years
Number of ways	2
Power voltage supply	220-240V
Screwed/screwless	Screwless
Number of earth terminals	1
Number of gangs	2
Product width	86mm
Product height	86mm
Maximum dimmable load (incandescent)	200W
Maximum dimmable load (halogen)	200W
Maximum dimmable load (fluorescent)	100W
Maximum dimmable load (LED)	100W
Minimum dimmable load (fluorescent)	5W
Minimum dimmable load (halogen)	20W
Minimum dimmable load (incandescent)	5W
Minimum dimmable load (LED)	5W
Waveform	Trailing edge
Voltage suitability	Mains voltage
Product code	5050765238168

Evolve, trailing edge, double dimmer switch that controls light levels and sets mood. Intelligent electronic circuit monitors connected load and provides a soft-start with protection against thermal, current and voltage overload. Suitable for dimming LED, dimmable CFLs and traditional lighting. Soft-start brings the lights to a set level in around 1 second and extends lamp life. Silent operation means no noise when dimming, while support for low wattage lamps eliminates flicker. Low profile screwless flat plate that clips on and off. Ideal for modern interiors.

Brand Name	British General
Colour	Matt Black
Material	None
Manufacturer Model No	PCDMB82B
Wear Type	None
Type	Dimmer Switch
Certifications Met	None
Country of Origin	None
Protects From	None
Waterproof	None
Dimmer Switch Operation	Rotary
Insert Colour	Black
Max. Dimmable Load (LED)	100 W
Min. Back Box Depth Required	25 mm
No. of Ways	2 Way
Number of Gangs	2 Gang
On/Off Switch Operation	Push
Overload Protection	Overload Protection
Terminal Capacity	Terminals accept up to 2.5mm² cable
Waveform	Trailing Edge

This Evolve Matt Black trailing edge double dimmer switch from British General allows you to control your light levels and set the mood. The intelligent electronic circuit monitors the connected load and provides a soft-start with protection against thermal, current and voltage overload, and is suitable for dimming LED, dimmable CFL's and traditional lighting.

Brand Name	British General
Colour	Black
Material	N/A
Manufacturer Model No	PCDMB82B
Wear Type	N/A
Type	Dimmer Switch
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Guarantee	25 years
Push on/off	with rotary dimming
Compatible with	Dimmable LED, tungsten/incandescent, halogen and dimmable CFL lighting
Terminals accept	up to 2.5mm² cable
Power voltage supply	Mains fed
Screwed/screwless	Screwless
Number of ways	2
Product width	86mm
Product height	86mm
Maximum dimmable load (incandescent)	200W
Maximum dimmable load (halogen)	200W
Maximum dimmable load (fluorescent)	100W
Maximum dimmable load (LED)	100W
Minimum dimmable load (fluorescent)	5W
Minimum dimmable load (halogen)	20W
Minimum dimmable load (incandescent)	5W
Minimum dimmable load (LED)	5W
Waveform	Trailing edge
Amp rating	0.8A
Volt-amperes	200VA
Insert colour	Black
Voltage suitability	Mains voltage
Product code	5050765220040

Brand Name	British General
Colour	Black
Material	None
Manufacturer Model No	PCDMB82B
Wear Type	None
Type	Dimmer Switch
Certifications Met	None
Country of Origin	None
Protects From	None
Waterproof	None
Number of Pockets	None
Wattage	200W
Profile Type	Raised Slim
Installation	Wall
Number of Gangs	2
Switch Type	Dimmer Switch
Switch Opperation	Dimmer
Waveform	Trailing Edge