Brand Name	Armstead Trade
Colour	Red Oxide
Material	Solvent-based
Type	Primer
Protects From	corrosion
Formulation	Solvent-based
Pack sizes	2.5L
Application information	Coverage Up to 9m² per litre on smooth surfaces of average porosity
Touch dry	2-6 hours dependent upon temperature and humidity
Recoatable	6-16 hours dependent upon temperature and humidity
Thinning	This product should not be thinned.
Application Key benefits	Provides excellent adhesion and rust inhibiting properties
Prevents the spread of corrosion.	Suitable for use on both interior and exterior ferrous metal surfaces
System information	To get the best results make sure the surfaces to be painted are sound, clean and dry. (New surfaces particularly must be fully dry). In the case of iron and steel, remove all loose scale and rust by thorough scraping and wire brushing. Leave new shiny galvanised metal to weather and become dull before priming with the Red Oxide Primer, or use a metal primer that is suitable for use on new galvanised metal. After suitable surface preparation, apply 1 or 2 coats of Glidden Trade Red Oxide Primer. Finish with an appropriate Glidden Trade paint system. After use, remove as much paint as possible from equipment before cleaning with white spirit.

Brand Name	Armstead Trade
Colour	Light Grey
Material	Metal
Manufacturer Model No	5249007
Wear Type	None
Type	Primer
Certifications Met	None
Country of Origin	GB
Protects From	Rust, Corrosion
Waterproof	No
Number of Pockets	None
Product Type	Oil Based
Recoat Time	6 -16 Hours
Application Method	Brush, Roller
Coverage	9m2 Per Litre
Touch Dry	2-6 Hours
Number of Coats	1
Surface	Metal
Water or Oil Based	Oil Based

A professional quality metal primer that has excellent adhesion and inhibits rust, preventing the spread of corrosion. It is generally resistant to heat up to 90ºC. Suitable for use on both interior and exterior surfaces. Not suitable as a primer for Acrylated Rubber Paints.

Brand Name	Armstead Trade
Material	Metal
Type	Primer
Protects From	rust
Product Type	Primer
Short Description	Armstead Trade Metal Primer Zinc Phosphate, generally resistant to heat up to 90ºC
Drying time (recoat)	6-16 hours
Drying time (touch dry)	2-6 hours
Suitable Surface	Metal
Coverage	Up to 9m2/litre
General No. of Coats	1
Application description	STIR THOROUGHLY BEFORE USE. After suitable surface preparation, apply 1 coat of Armstead Trade Metal Primer Zinc Phosphate, followed by an appropriate Armstead Trade paint system. Touch dry: 2-6 hours. Recoat: 6-16 hours.
Cleaning	After use, remove as much paint as possible from equipment before cleaning with brush cleaner.
Storage	Do not use or store in extremes of temperature.
Disposal	When this paint container is empty please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly and consider donating it to Community RePaint. Find out more at armsteadtrade.co.uk/pp
Safety information	Application: Brush or roller only. For Health and Safety reasons related to all solvent based paints, spray application is not recommended.