Baumit Drip Bead has been designed specifically to provide a fine edge of render at termination points. It can be used above or below windows, lintels, plinths, balconies and any protrusion from a building to stop water retention and to help runoff. Baumit Drip Bead is manufactured of tough plastic and has a mesh of 125mm either side. It comes in 2m lengths and can be cut to length or joined with other lengths as required. The mesh adheres well to the render and helps avoid cracks as well as ensure water egress. Baumit Drip Bead: Tough plastic construction for adequate reinforcement. Flexible enough to prevent cracking. Can be cut to size or connected to other lengths. Provides water runoff at render edge. Suitable for use with Baumit insulation systems. Typical use of Baumit Drip Bead Baumit Drip Bead is intended to terminate render and to help water egress. The tough and flexible nature of the product lends itself to all manner of situations and surfaces. It can be applied over or under protrusions and resists cracking and the weather. Baumit Drip Bead should be applied before other reinforcements and secured with the appropriate adhesive or render. It can then be covered with render as necessary.