Britannia Aquashield High Build Waterproof Roof Coating is ready to use without the need to prep most substrates. It works instantly, waterproofing the surface with only one coat needed. Britannia Aquashield can be rained upon immediately and it will have no negative effect on the drying, waterproofing or longevity of the product. Britannia Aquashield High Build Waterproof Roof Coating is available in 5kg and 20kg tins in three colours: black, grey and solar reflective white. This 5kg tin will cover at least 2m2 depending on the substrate. Suitable for general maintenance, but not for heavy foot traffic areas, this solvent-based waterproof roof coating is applied with a brush or a squeegee on a range of substrates. Most of these substrates dont need priming and you will just need to clean of moss, lichen and debris before you begin applying the coat. Dont worry about small gaps or cracks either as fibres in this Britannia paint lace together to cover these. Please note:  The full drying time of this product is 6-7 days depending on the outdoor temperature and the thickness of the coating. Rain will have no adverse effect on this drying period. Where can I apply Britannia Aquashield High Build Waterproof Roof Coating? Suitable substrates for this product are: Flat roofs Pitched roofs Weathered asphalt Bituminous surfaces Gutters Concrete Brickwork Fibreglass Felt Galvanised and ferrous metal This product should not be painted on to walkways, timber surfaces, new or aged PVC, plasticized PVC or balconies. It should not be used internally. This tin is 5kg and in the colour grey.