Combining a lightweight material with a beautiful authentic finish, Britmet LiteSlate will create a clean long-lasting finish whilst still looking like a natural slate roof. The roof ridges have the same characteristics as a more traditional slate roof, with each ridge being a traditional slate colour. LiteSlate has been designed to be durable and last. It will not crack, break or chip like a traditional tile would, it will also not delaminate due to its design and manufacturing process. LiteSlate is not only easy to fix, it is a stress-free roofing product as there are visible fixing locations, pre-installed spacers and easy to follow lapping instructions. Due to the easy installation anyone can fit these products, from doing your own DIY project to experienced roofers. When fitting and cutting no extra tools are required, the tiles can be cut by either a sharp fine tooth saw or a sharp blade. Features and Benefits Lightweight Authentic finish Easy to fix Easy to cut Product specification Minimum pitch: 14.5 degrees Maximum pitch: 90 degrees Overall width: 442mm Fixings: 2 per slate Weight per M2: 15.5° - 11.70kg25.0° - 10.60kg27.5° - 10.00kg30.0° - 9.50kg Delivery Notes - Our slates are typically delivered on a six-wheeled lorry (11m long & 2.4m wide) with a tail-lift facility to offload on solid, level ground with a pump truck.Non-compliance to delivery restrictions may result in additional delivery charges. Should you specifically require a crane or small vehicle offload, please notify us at the time of placing the order, as an additional charge may be incurred. Please allow 5% extra in the ordered quantity to cover acceptable breakage in transporting natural slate products