600mm diameter x 1075mm deep twinwall catchpit chamber with 225mm twinwall inlet and outlet.Our Catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install there is no need for machinery or heavy lifting equipment.Our Catchpit Chambers are factory assembled and come in one piece.Catchpit Chambers Features andamp; Benefits300mm deep sumpStandard Restriction Cap supplied with 1500mm andamp; 2000mm deep chambers to comply with SfA7225mm twinwall pipe options to fit twinwall pipework systemsOptional inlets available to suit site requirementsThese catchpit chambers are manufactured in the UK to BS EN 13598-2 (2009).To find out how to install your catchpit chamber view ourandnbsp;general installation guide.Inlets andamp; OutletStandard outlet will always be at 0 degrees and the standard inlet will be at 180 degrees.Changes to this and further inlets can be accommodated dependant on the diameter and position required.The diagram shows the preferred options if multiple inlets are required.Please contact us with any amends you would like before ordering.andnbsp;We will advise on the suitability once we have the details of your requirement.Delivery of Catchpit ChamberPLEASE NOTE - All catchpit chambers come on a 3-5 day delivery timescale. Customised products will likely take a little longer.