This lead is rolled (or milled) which is of higher quality than cast and therefore conforms to BS EN 12588 : 2006. Code 5 Lead is 2.24mm thick (a 24% increase over code 4 lead) and weighs 25.40kg/m2 (Thickness to BS EN12588 tolerances of +/- 5%) Because of this code 5 lead can be used in all aspects of pitched roofing for sheltered applications. It can also be used for severe weather exposure for everything but flat roofing, parapet, box and tapered valley gutters. You can safely use Code 5 leas for vertical cladding, dormer roofs and cheeks, chimneys, hip, ridge, apron or cover flashings. As with code 4 lead, when the application is exposed to more severe weather and you are using lead for parapet, box or taper gutters, or if you are working on a historical or listed building (such as a church roof) the thicker gauges of lead are suggested. Code 5 lead is appropriate on historical or listed buildings for uses such as chimney flashings or lead slates The increased thickness also means that, like code 4 lead, code 5 lead has increased resistance to thermal movement and therefore the maximum length of flashing can be increased by 50% over code 3 lead to 1.5metres. It isn’t advisable to use any flashing in longer than 1.5m lengths. It is always worth remembering that when chasing out brick or stonework, you should avoid pointing with mortar and instead use a lead sealant that allows for thermal expansion and contraction. Features: Been in use as a building material for centuries. Easily shaped Long lasting and flexible in all weather conditions. Easy to install Will out-perform other building materials (if the rules of good practice are followed) 100% recyclable time after time. Melting point - 327.4°C. Atomic weight - 207.2. Atomic number - 82. Density - 11.34g/cm3. Co-efficient of linear expansion - 0.0000297 per °C. Thermal Conductivity - 34.76W/m °C. Need a bespoke size? We offer a cutting service so please contact us to discuss your requirements.