CORRAPOL-PVC DIY grade corrugated sheets are the perfect choice for any low cost projects and general DIY. CORRAPOL-PVC is manufactured to the same profile as the whole CORRAPOL range. This means CORRAPOL-PVC can be used alongside any CORRAPOL sheet to allow daylight through in certain areas of a roof. CORRAPOL-PVC is not as long lasting or as strong as the CORRAPOL Stormproof range. However, these PVC sheets offer a lower cost and CORRAPOL-PVC is ideal for areas where impact resistance is not important. The CORRAPOL-PVC DIY grade sheets offer an excellent waterproof solution with good light transmission. CORRAPOL-PVC DIY Grade Sheet Features & Benefits Low Cost Maintains great light transmission Allows a degree of visibility whilst retaining privacy High strength High rigidity Lightweight CORRAPOL Sheet Installation Measure the roof to work out the number of sheets, eaves fillers and fixings required. Angle of roof should be a 10? slope, the top of the purlins should be painted white. Measure roof and CORRAPOL® sheeting, clamp panel down and cut the excess with a fin tooth bladed Jigsaw allowing for an overlap of 50-60mm. Place the eaves filler under the CORRAPOL®. Overlap the first corrugation crown onto the edge of the roof and fix using fixing screws. Screw in the fixings at every second corrugation crown. Applications Carports Canopies Cold frames Porches Greenhouses Covered equestrian areas DIY projects Lean-to’s Specifications Dimensions:2500mm x 950mm Material: PVC