Essential All Stone Sealer Satin Finish is a specialist sealant for porous outdoor natural surfaces. The safe, environmentally friendly composition is a topcoat protection sealer that produces a long-lasting, transparent satin finish. The Essential All Stone Sealer Satin Finish dries quickly and is effortless to apply. It offers superior protection by preventing water-based stains and general debris and dirt from entering the surface, making it easier to properly maintain. On textured and riven surfaces, the coverage averages 4-6 square metres per litre. On smooth, honed, or polished surfaces, up to 15sq metres per litre. Available in 5L and 25L. HOW TO APPLY: 1. Remove any loose debris from the work surface before beginning your work, and make sure you have adequate personal protection, such as gloves , proper protective eyewear , a face mask , and appropriate clothing. 2. Before applying the product, make sure the surface is completely clean and dry. Ensure that weather conditions are suitable to use this product. 3. All Stone Sealer Satin Finish must be spread thin and uniformly with a low-pressure sprayer , micro-fibre mop , paintbrush , or soft cloth . Also, avoid leaving application marks or allowing the product to puddle on the surface. DON'T DILUTE THIS PRODUCT. 4. After that, wait 45-60 minutes before applying the second layer and repeating the process. An application tip is to apply the product in the opposite direction to obtain an even, uniform finish. If additional coats are required to produce the desired "gloss" finish, they can be applied. PLEASE NOTE: When this product is applied, the colour and/or appearance of the stone will change. As a result, always test the product in an inconspicuous area before using it. Masking tape can be used to protect any surfaces that are not to be sealed. This product is not suitable for Kandla Grey (mid & light grey) sandstone.