The Gold Satin finish from Essential Sealer is a multi-purpose indoor stone sealer that creates a satin/gloss finish. Created to provide outstanding sealing and oil/ stain resistance to all varieties of indoor stone surfaces, such as slate, limestone, granite, quartz, sandstone, travertine, marble, and many others. Quick drying and easily protects a surface from oil and water-based stains. It  It produces an appealing satin/gloss shine that becomes more noticeable the more you apply it. Keep in mind that it should not be used on highly polished stone or ceramic glazed surfaces. Depending on the texture and porosity of the surface, if applied undiluted, coverage can be up to 25m2 per litre per coat. This product is available in 1L, 2.5L and 5L. HOW TO APPLY: 1. Remove any loose debris from the work surface before beginning your work, and make sure you have adequate personal protection, such as gloves , proper protective eyewear, a face mask , and appropriate clothing. 2. Prior to use, it is always recommended that you perform a brief patch test application in an unobtrusive place. This will determine whether or not Essential Sealer's Gold Satin Finish is an appropriate solution for your surface. 3. To start, use a low-pressure sprayer and a micro-fibre mop , paintbrush , or soft cloth to apply a thin layer of product evenly, being careful not to leave application marks or enable the product to puddle on the surface. 4. Allow 45 to 60 minutes for the first coat of finish to dry before trying to apply the second coat. 5. Repeat the process, but this time apply the product in the opposite direction to better accomplish an even and consistent finish. It's a good thing to keep in mind that you can apply multiple coats of product, to achieve the desired finish. PLEASE NOTE: Surfaces which are not intended to be sealed must be protected with masking tape . Always test the product in an inconspicuous area to determine suitability for intended use.