Essential Stone Floor Rejuvenator is a natural stone cleaner that generates a fresh clean surface whilst also adding an additional top-up liquid wax sealing effect. It can be applied as a finishing touch to professional pre-sealed surfaces. As well as protecting against oil and water-based stains. It also conditions, protects, and rejuvenates natural stone by offering antimicrobial protection. In summary, Essential Stone Floor Rejuvenator is an environmentally friendly natural stone conditioner that amplifies the natural beauty of several different types of natural stone. It is very simple to apply; easily buff into the stone with a clean cloth or sprayer. This product is appropriate for both internal and external use, with added UV protection. Without diluting this product has a coverage of Up to 30m² per litre.  Available in 1L and 2.5L. HOW TO APPLY: 1. Remove any loose debris from the work surface before beginning your work, and make sure you have adequate personal protection, such as gloves , proper protective eyewear , a face mask , and appropriate clothing. 2. Prior to use, it is always recommended that you perform a brief patch test application in an unobtrusive place. This will determine whether or not Essential Stone Floor Rejuvenator is an appropriate solution for your surface. 3. Before applying, ensure the surface is entirely dry, clean, and free of any waxes, sealants, or coatings of any kind. 4. Use a low-pressure sprayer or a cloth to apply the product evenly. After applying the solution to the surface, allow it to penetrate the floor for 10 – 15 minutes before buffing to a low to medium sheen. 5. Dry to the touch in about 30 – 40 minutes and cures completely in 24 hours. After application, test with water drops; if droplets are absorbed, a second or third coat may be required. Keep adults, children, and pets away from the area until the product has completely dried. PLEASE NOTE: Surfaces which are not intended to be sealed must be protected with masking tape .