The Farmscape product range is designed to reduce the visual impact of buildings on the landscape by giving them a weathered look from new. This is done by applying a surface pigmentation to the top surface of the sheet during manufacture. Unlike a dense layer of gloss paint, this process allows the distinctive texture of the fibre cement substrate to show through and give the product a far more natural appearance than that traditionally available to planners and designers. Please note: there is a limited range of fittings available for the Anthracite sheets but the full range of Profile 6 fittings are available in Natural Grey. Rust, rot and corrosion free. Properties Length: 3.05m. Width: 1086mm. Cover width: 1016mm. Nominal thickness: 6.7mm. Minimal density: 1400kg/m3. Profile: 6". Minimum roof pitch: 5°. Approx weight (with 150mm laps): 17kg/m2. Enviromental impact A Manufactured in the UK, Eternit’s fibre cement profiled sheeting can achieve up to an A (the lowest environmental impact) in the Green Guide to Specification. Insulated systems Built up systems using either a fibre cement or metal lining tray, together with a quilt insulation, have commonly been used in conjunction with fibre cement sheeting. In more recent years, rigid insulation boards sometimes supported in a T bar grid, have also been used. There are other methods of insulating a roof that may be more appropriate for the design of the roof structure and the required thermal performance. Please contact usfor further advice. Features • 5° minimum pitch. • Designed to blend. • Can achieve A or A ratings in the Green Guide. • Only UK manufacturer of fibre cement profiled sheeting. • Highly cost effective weather proofing. • Low maintenance roofing solution. • Does not rust, rot or corrode. • Resistant to chemical attack. • Excellent noise and thermal insulation.