Fire test - BS476 part 22 & BS EN1634 Fire Rating - FD30/60 CE Mark - Yes Kit contains: 1 x 76mm BS Euro Profile Deadlock (SS)1 x 75 x 105mm Universal BS Intumescent kit to suit 76mm sashlock lock with backset and strike plate1 x 70mm Euro Profile Cylinder with Thumb Turn PLEASE NOTE: Many fire rated ironmongery products require intumescent to be fitted AS STANDARD (to validate the Certifire certification). Please check for details. Dimensions Dead Lock: 76mmIntumescent Kit: 75 x 105mmThumb Turn: 70mm Important Legal Information It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third-Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.