Flexitec 2020 Primer requires powder hardener at a minimum of 2% and a maximum of 4% depending on temperature. To ensure that the curing process is not impeded:Never use less than 2% even in hot conditionsNever use more than 4% even in cold conditions The Flexitec 2020 System by Res-Tec is a flexible, single resin GRP system with full overlay and new deck capabilities. Combining the best elements of fibreglass with the versatility of overlay systems, no other flat roof solution performs at this level across so many applications. Flexitec 2020 GRP Roof System Features Flexitec 2020 is rapid curing with an extra-tough finish, 30-60 minute walk-over time. It can be applied to almost any roof surfaces including felt, asphalt, concrete, GRP, PVC single-ply, metal details and approved insulation boards. The Flexitec 2020 system can be repaired or overcoated without grinding down. If applied as a one coat (10 year repair system) or two coat (20 year roofing system) system. Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20 year materials guarantee. Flexitec 2020 is highly flexible and suitable for any size or shape roof without the need for expansion joints. This is suitable for application in temperatures as low as 5°C or as high as 30°C and is, a totally seamless membrane – no joints, no welds, no weak points. There is an anti-slip finish available for balconies and walkways. Flexitec 2020 can be cold applied for maximum safety which means no risks from open flames and other hot works. Benefits Coats most roof surfaces Applies in low temperatures Fully fire retardant, test to BS 476-3 rated F.AA and EN 13501-5(4) the highest rating a flat roof system can get and allowing for unrestricted use under UK regs. 20 year trusted guarantee Fully reinforced High eco performance Made in the UK