Please read all of my important application details below.Elevate your floors with these marble inspired peel and stick tiles. White and grey hues will brighten up rooms with a splash of elegance. Opaline Peel and Stick Floor Tiles contains 10 pieces that each measure 12 x 12 inches. This product measures 60-in x 24-in x .06-in when assembled.[ Click here](https://prismic-io.s3.amazonaws.com/dunelm-prod/ed94e9b4-2165-4ca9-889e-815d454566a8_FloorPops_Instructions.pdf) to view the installation instructions.Extra Installation Information:For Proper Installation: Lay tile package flat and allow 48 hours to acclimatise to roomtemperature of at least 18°C.Be sure the surface is clean, smooth, flat and dry before applying. Areamust be free of grease, dirt, wax, uv coating, and other oils. Make sure to not apply tiles to loose or uneven flooring, and radiantheated floors. If installing over concrete, a primer adhesive is necessary for a secureapplication.Installation Tips: You may find a slight variation in design match from tile to tile. Thisvariation should not affect the overall look of your floor. Be sure to rotatetiles for best look. If necessary, use a straight edge and utility knife to trim tiles to fit, whenyou reach the edge of your walls. Make sure sufficient pressure is used to lay the tiles, the adhesive withcure stronger over time but will need a good amount of force tostrengthen the bond between tile and floor It is also recommended that skirting boards are lifted and reinstalledover the new tiles to allow room for expansion. If tiles are laid snugagainst the wall, the pressure caused by expansion can cause them tolift.[Frequently Asked Questions](https://prismic-io.s3.amazonaws.com/dunelm-prod/0cb92a90-37d1-44b7-9648-3928fb4f8727_FAQ.pdf)