| Brand Name |
Owatrol
|
| Colour |
N/A
|
| Material |
N/A
|
| Manufacturer Model No |
N/A
|
| Wear Type |
N/A
|
| Type |
Marine Enamel
|
| Certifications Met |
N/A
|
| Country of Origin |
N/A
|
| Protects From |
UV and Anti-corrosive properties
|
| Waterproof |
N/A
|
| Number of Pockets |
N/A
|
| Pack Size |
1 Litre, 2.5 Litre
|
| Ideal uses for Owalak |
Interior and Exterior, All Surfaces above the waterline, Metal (Aluminium, Steel, Galvanised steel, etc.), Painted surfaces, Wood, Gelcoat etc, Previously painted surfaces – Polyurethane, Epoxy, Alkyd, Acrylic etc, Pipes, Machinery, Superstructures, Handrails, Cabins etc
|
| Surface Preparation |
Surfaces must be clean, dry, in sound condition and free of oil, grease and other surface contamination including any preparation residue e.g. blasting, sanding etc. before applying Owalak.
|
| Application |
Stir product well before and during use. Do not thin unless otherwise indicated. Apply 2 or 3 even coats allowing drying time between each coat. Optional Brush/Roller application – 5% Marine Oil may be added to the 1st finish coat. Spray application – 5% Marine Oil or White Spirit may be added to ease application.
|
| Clean Up |
Clean all tools and equipment with white spirit while still wet. If allowed to dry, remove with paint stripper.
|
| Things to remember |
Protect everything you do not wish to coat. Apply between 5°C (41°F) and 35°C (95°F). Substrate temperature should be between 5°C (41°F) and 35°C (95°F). Ensure substrates are at least 3°C above dew point. Do not apply in direct sunlight or to hot surfaces (35°C+). Surfaces must be fully dry before applying any coating. Do not apply if cold and/or wet weather is expected within 24 hours. Use appropriate protective clothing e.g. gloves, goggles, mask etc.
|
