Universal wood stabiliser for all DRY FLEX® repair products. Ensures maximum adhesion between any DRY FLEX® repair product and the substrate. Repairs with any DRY FLEX® can be completed up to 24 hours after application of DRY FIX® UNI. Low viscosity an solvent free to penetrate quickly and deeply into the wood. Easy to apply with a brush.Surface Preparation:Remove any paint coatings from the surfaces to be treated andsand back to bare smooth wood. Check the moisture content of the surface (maximum 18%) and the condition of the wood with the EASY•Q ™ wood condition meter. Ensure that all decayed or excessively soft wood, and weathered, damaged or burnt wood is completely removed until a sound substrate is achieved. A router equipped with a round head cutter (diameter of 9,5 mm) is ideal for this. All surfaces must be free of dust, dirt, grease, raised wood fibres and general contamination.Application:On all applications, use a brush to pre-treat the affected area (repair surface) with DRY FIX® UNI, before applying DRY FLEX® or BIO FLEX™. Allow a minimum of 20 minutes and a maximum of 24 hours to penetrate the surface of the timber before applying DRY FLEX® or BIO FLEX™. Remove any excess DRY FIX® which has not penetrated into the wood after 20 to max 45 minutes with absorbent paper. Apply DRY FLEX® or BIO FLEX™.Comprised of 200ML Component A & 100ML Component B.

Brand Name	Repair Care