Ideally suited to a kitchen or utility room, the Sanivite+ powerful pump has four inlets for connection to domestic sinks and appliances. With compact dimensions, Sanivite+ can be concealed in a kitchen unit or behind a demountable panel in bathroom suites to give access for servicing. This model is designed to plough through even the toughest of waste from the kitchen or utility room. Sanvite+ is constructed from a high-tech pressure chamber that will stop and start the unit and the motor, which then activates the pump. When the water from your appliances enters the Sanvite+, it starts up the motor within the chamber, this then drives the blades which mash up the waste into pure liquid and eventually is pumped into a drainage system. This Macerator is manufactured by Saniflo, the UK's leading brand for macerators, therefore you know that you're in good hands, however, if you do find anything wrong with your product you're covered by a fantastic 5-year guarantee against all factory defects, just for that added peace of mind after installation Features and benefits: copes with warm, soapy water Four inlets Low activation level (95mm) Compact and concealed design 5-year guarantee Technical information: Pump (Vertically): 5 metres Pump (Horizontally):50 metres Discharge & Pipework: 32mm Inlet Pipework: 40mm Motor Power: 400 Watts Flow Rates: 90 litres/min Dimensions: Depth: 189mm Width: 369mm Height: 277mm Caution – Do Not Exceed Waste Water Temperature Limits The Sanivite+ has a working temperature of 35ºC, it will handle temperatures up to 90ºC but only for very short periods.(5 Minutes) If connecting a dishwasher or washing machine to a Sanispeed you will need to ensure that the appliances are not run on hot water cycles which exceed these limits. If you need a Lifting Station that is designed to operate at higher temperatures click here Saniflo Do Not Accept Returns If your Saniflo macerator is faulty then you will need to call out an approved Saniflo engineer. Saniflo will not accept returned product for hygiene reasons and require any fault to be verified on site by the engineer. Engineers aim to be with you in 48 hours although longer delays are possible 5 Inlets A 5 inlet macerator connects to any 5 of the following products: Sink Dishwasher Washing machine Basin Shower Inlet size: 40mm Outlet size: 32mm 5 Saniflo Problems and How To Fix Them You may not need to replace an old Saniflo unit. Below are five common problems associated with Saniflo brand macerators and some quick tips on how you can fix them. The Saniflo Is Giving Off a Terrible Smell ! Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that’s always left in the Saniflo. Other Macerator brands have self-cleaning technology, but Saniflo’s need to be descaled regularly. If you’ve never descaled your macerator then you may have to do this a few times to clear the smell. The Saniflo Keeps Tripping The Electrics If your Saniflo is tripping the electrics, it usually means that water is getting into it and leads to the circuit shutting off to avoid any other damages, or there’s a loose wire. Always make sure the electrics are off before you inspect the pump. If there’s an issue with the motor seal, then call a certified Saniflo engineer to repair it. If the motor is worn or faulty, this unfortunately means that you’ll have to purchase a new macerator.   The Saniflo Starts On its Own! There could be a few reasons as to why your pump keeps starting on its own throughout the day and night: (Excluding the possibility of a ghost!) The microswitch is misfiring because it keeps thinking the tank is full – you will have to manually remove the waste between the switch and the tank floor and then reset the pump. If the rubber membrane is damaged, waste can then get into the switch and cause a problem. In this case, you will have to purchase a new rubber membrane and switch. Saniflo Leaks During Operation One reason for your Saniflo leaking from the vent could be that there is a big build up of waste inside which will have to be manually removed. It’s also possible that the motor is nearing the end of its life and can’t work as hard as it used to. This would mean the whole macerator should be replaced. The rubber waste outlet could have shrunk because of too much toilet cleaner. If water is spraying out the vent, you will need to replace the rubber waste outlet.   Saniflo Vibrates & Buzzes Loudly If when flushing the toilet you hear a horrible vibrating noise, there’s probably something that has been lodged in the macerator blade. Turn off the Saniflo and remove the lid. If you see an obstruction straight away, remove it. If the foreign object is in the blade you can remove it using small pliers.            

Brand Name	Saniflo
Colour	White
Country of Origin	France
Manufacturer Model No	6004
Type	Macerators