Brand Name	Sikkens
Colour	White
Material	Water-borne
Type	Primer
Protects From	extractive discolouration
Coverage	10m2/litre
Pack sizes	1 and 2.5 litre cans
Applications	Finishing coat: For use on exterior hardwood and knotty softwood and timber species that carry a risk of extractive discolouration.
Key benefits	Minimises extractive discolouration. Provides a sound base for subsequent coatings. Provides optimum adhesion and flexibility. Quick Drying. Low odour.

Brand Name	Sikkens
Material	timber
Type	Primer
Product Type	Primer
Short Description	Having stain-blocking properties, this is a medium build, water-borne primer
Drying time (recoat)	4-6 hours
Drying time (touch dry)	20 minutes
Suitable Surface	Wood
Coverage	10 m²/L
General No. of Coats	1
Application description	Conditions : Do not apply if there is a risk of rain, or when air/substrate temperatures are below 8ºC or above 25ºC during application or drying periods. Protect from frost and rain until dry. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol BL Primer is supplied ready for use. Do not thin.For best results use a good quality synthetic-fibre brush specifically designed for the application of water-borne products.Apply product in a full flowing coat, laying off in the direction of the grain. Use the minimum number of brushstrokes required for an acceptable finish. Avoid overbrushing, which creates brush marks, produces a poor quality finish and reduces the effectiveness of the coating as a blocking primer. Coating system durability can be improved by use of end grain sealers.After applying one coat, allow a minimum of 4 hours drying time if a second coat is required. On new work, where practical the first coat should be applied all round prior to fixing. Pay special attention to exposed end grain, tops and bottoms of doors, and undersides of cills. Carefully denib the coat using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper. Remove all dust.Subsequent coatings should be applied as soon as possible after Cetol BL Primer has dried, but no sooner than 15 hours,in order to provide full protection and isolation of extractives. In any event this period should not extend beyond three months, otherwise additional preparation and coating may be necessary. If applied to exterior wood and the contract is of long duration, it is suggested that a further coat be applied prior to finishing to make good any weathering during the construction period
Cleaning	Brushes should be cleaned immediately after use with warm, soapy water, and then rinsed thoroughly with clean water. If spilled Cetol BL Primer may be removed immediately while still wet using warm,soapy water
Storage	Store in cool, dry, frost-free conditions

Sikkens Cetol BL Primer is a water-based priming coat for exterior wood. Suitable for both softwoods and hardwoods where it is flexible, microporous and provides good adhesion for BL finishing coats. Bleeding knots and resins is prevented. Application is by brush with coverage up to 10sq/m per litre, recoatable between 4-6 hours.

Brand Name	Sikkens
Colour	White
Material	N/A
Manufacturer Model No	HC6502005J
Wear Type	N/A
Type	Primer
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Size	2.5L
Application Methods	Brush
Coverage	Up to 10sq/m per litre
VOC level	Medium
Thinning	Water
Recoatable	8-12 hours
Suitable for...	Exterior use
Finish	Matt
Cleanup	Water & Detergent