Used for retaining netting wire rope perimeter frameworks on the outside edge of parapets or ledges without having to drill too close to the edge of the substrate, which would potentially cause damage. Can also be used to stand netting clear of any architectural features to prevent damage from chaffing, or to allow windows to open behind nets without making contact.25mm x 3mm stainless bracket in 200, 350 & 500mm lengths.Netting perimeter wire can run horizontally or vertically through the bracket.The bracket contains either two, three or four 8mm diameter fixing holes.First fixing hole is 50mm in from end of bracket then at 60mm centres. Twist at end starts 50mm from end of bracket fixing and guide holes all 8mm in diameter.