Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Brand Name	Trend
Material	Solid Carbide
Manufacturer Model No	TRE2-61X1-4TC
Specification	D1=1/4 inches, D1=6.3 mm, C=25 mm, Overall lng.=57 mm, Shank Diameter=1/4 inch
Accessory Type	Router Cutter
ebay_category	122829