The wire hanger is an expansion anchor for securing suspension wires in concrete, enabling fast and accurate installations of netting perimeter wire rope systems.Ideal for use as a fast-fit light-medium duty masonry intermediate fixing.Fast light-medium duty intermediate masonry fixing for netting Ideal for netting installations over 100 metre squared especially 19mm & 28mm nets.Simply drill an 6mm X 40mm hole insert fully and pull firmly backwards.Manufactured in BZP mild steel.Dimensions:Requires a 6mm diameter holeOverall length: 55mmHole depth required: 40mmTensile load rating 1.5KNEyelet diameter: 6mmUsage/Spacings:75mm and 50mm mesh nets: 1m28mm mesh nets: 0.5m19mm mesh nets: 0.3mInstallation:Mark required position of the fixingDrill a 6mm diameter hole to a minimum depth of 40mmBrush / blow-out all dust and loose materialInsert fixing fully and pull firmly to lock in positionDo not use fixing less than 35mm from an outside edge or corner